본문 바로가기
Ricecakemachine

Questions of Rice cake machines from Buyers

Nick SYP 2020. 3. 15. 21:25


Questions of Rice cake machine from Buyers 


We are receiving various questions from buyers.

If you have any questions, please visit our FAQ.

https://www.newpop.co.kr/faq-rice-cake-machine


Or please contact us and we will reply as soon as possible.

Below are the questions we receive from buyers.


1. Can we change the type of mold or 1 of your machine is fixed to 

    1 mold?

>> We do not recommend it.

     Parts vary depending on model. And it is difficult to handle if a

     problem occurs when replacing.


2. How many mold we get if we buy this machine? And how much does 

    it cost to buy 1 mold?

>> You can use additional molds for experimental use but not for

     production.

     Prices range from $ 2,000 to $ 3,000 depending on the model.


3. What is the difference  between thickness by speed and thickness 

    by time?

>> Thickness by speed is used when big changes are needed.

      Usually it is set at the factory so it is not used well.


4. Where can we set the pressure (i didn't see it in your video), 

    the range of pressure available and what effect it will bring?

>> If you purchase a machine, you will find detailed instructions in the

     manual.

     Usually 70-150kg, the higher the pressure, the larger the expansion

     of the raw material.


5. How much raw material (grams) will be inputed to the mold in core 

    depth 1 and 2?

>> Core depth is not related to the amount of raw material.

     This is to adjust the depth at which the core mold descends when the

     raw material is supplied. This can change the surface of the product.


6. When will the heat temperature recovered and what will happen when 

    the heat is recovering? Is there any effect to the texture or flavour or 

    other aspect of production when the temperature is dropping?

>> When the machine starts operating for the first time and the material

     is supplied, the temperature of the mold temporarily drops.

     If the temperature drops, the expansion will fall and the desired

     product will not be produced.

     As the temperature rises again, normal products are produced.


7. What kind of raw material do we put to the maachine 

    (premix or mixed in the hopper)?

>> Grains and pellets are the primary raw material.

     And, depending on the grain, there is a necessary amount of

     moisture, and it is necessary to add moisture 6-12 hours before use.

     Information about this is available on purchase of the machine.


8. Total machine electricity consumption for your machine (watt)? 

>> It's depending on the model from 2.0Kw to 3.5Kw Max

     SYP8501(2.0Kw) SYP9002(3.1Kw) SYP4506(3.5Kw) etc..

     This information is mentioned on the model info. at


9. Do you know the max % for chia seed?

>> There is a large amount of oil in the seed, which can cause oil to

     contaminate the machine. Use as few as possible.


10. When you said it's difficult to pop oats, is it still possible or 

      impossible?

>> Oat is also possible but It is less inflated than just other grains.

    (Test video : https://www.newpop.co.kr/single-post/Test-of-Oat-Pressed-Oat-by-SYP8501) Depending on the model, you may have to mix other grains to make the product.


11. What kind of fabric used to clean your machine?

>> 100% cotton material.

     Nylon and other materials can melt or burn due to heat.


12. If we use wire brush, will it scratch your machine? I'm affraid the 

      product quality will be compromised if your machine is scratched.

>> The material of the mold is not weak enough to cause scratching

     with the wire brush.


13. Can I get further detailed catalogue regarding your machine 

      specification and technical specification?

>> Please see the attached files

     also you can see the specification of models

     at https://www.newpop.co.kr/model-info-rice-cake-machine

     and if you visit our blog at

     https://www.newpop.co.kr/blog-rice-cake-machine

     you can see the updated info. of test & etc..


14. Can I get a few video showing the process of your pop machine 

      starting from feeding to product outcome?

>> Yes, please see the video here at

     https://www.newpop.co.kr/single-post/How-to-use-rice-cake-machine


For more information, please check our website.

Please contact us by e-mail.


Thank you.


Main Page (English)


Info. Of rice cake machine


Model info.


Models of Round shape


Models of Square, Rectangular shape


Models of Triangle shape


Models of Special shape


Activities (Buyer’s visit / Test)


FAQ of rice cake machine


NEWS of rice cake machine



Contact of rice cake machine


Main pages (by languages)


Main Page (Spanish)


Pages



Email: newpop@newpop.co.kr / Whatsapp: 8210.9596.8210

저작자표시 비영리 변경금지

'Ricecakemachine' 카테고리의 다른 글

SYP4545(S6) Chip type rice cake machines  (0) 2020.03.15
SYP4545(S6) 45mm Square rice cake machines  (0) 2020.03.15
Spelt chip made by SYP4506 Rice cake machines  (0) 2020.03.15
Black Rice Chip made by SYP4506 Rice cake machines  (0) 2020.03.15
Test of SYP4506 rice cake machine with Spelt from Bulgaria  (0) 2020.03.15

'Ricecakemachine' Related Articles

티스토리툴바